Technical Parameters
● Material Press Range:0~8bar
● Operative Temp.Range:-10C-+150'c
● Operative Air Press6-8bar
Material
● Material Contact Parts:304 or 316L
● Sealing materlal:standard EPDM Sllica gel,fluorine
● Gel for option
Tel:86 13616616960 Email:451798851@qq.com
Functional features of single-seat double-seal mix-proof valve
This valve adopts single valve disc and two sealing ring technology. which is used for anti-mixing separation in pipeline systems. This valve is a more economical choice of double-seat valve. The cavity between the sealing rings on the valve disc is connected with the two The discharge valves are connected. Through these two discharge valves, whether the sealing ring is leaking can be detected and the cavity can be cleaned.
Advantage
● Less components
● Less space
● Easier maintenance
● No dead cormer
● No contact between drain system and products
● The separation chamber cleaning will not occur any hydraulic-pressure and not influenced by theequipment or valve status.
Surface treatment
● Outside:Sandblast Ras1.6μm
● Sublight Ras0.8um
● Inside:polish Ras0.4μm
Actuator requirements for compressed air quality
● Compressed air joint:air pipe equiped equips with air adapter R1/8"
● Max grain size:0.01mm
● Max oil content:0.08ppm
● Dew point:below 10'C or less
● Max water content7 .5g/kg